Products

Disintegration Tester is a solid state instrument designed for the accurate estimation of disintegration time of tablets as per IP/USP standards. The instrument is designed to test two batches of six tablets, simultaneously. The unit is extremely useful for pharmaceutical industries. It is used in quality control and R & D to determine compliance with the disintegration requirement of the tablet and capsule as per USP/BP/IP standards. Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts, which guide you throughout the measurement process. Specifications: » Complies with USP, IP specifications » Extremely useful for pharmaceutical labs » Highly Accurate and Easy to Operate » Baskets UP & DOWN movement as per IP/USP Specifications » 20 x 4 Line Alphanumeric LCD with Backlit » 15 Soft Touch Membrane Type Keys

The Digital Bulk Density Apparatus is a microprocessor based instrument designed to study the packing down of powder beds of different pharmaceutical & chemical powders and gives accurate & repeatability of the result. Bulk Density is an essential test required in the process of Tablet manufacturing, capsules filling and cosmetics manufacturing as important part of quality control program. 4 digit microprocessor based Pre-set counter provided to set exact no of strokes. This feature eliminates the tedious calculation of Timer Mode. A common holder for both the cylinder drops down smoothly from the specified height. Easy to lock cushioned holders are provided to hold the cylinder. In power failure, the non-volatile memory of the microprocessor remember the last mode of operation, and complete the test after the power supply is resumed. It has the following features: Specifications : » Display: Digital 12 mm Red LED » Speed range - 30RPM Mechanical Timer/Digital counter as per requirement.

Demulsion Bath As per ASTM D1401, DIN51599 Demulsion Bath or Demulsibility Bath is used for determination of ability of a lubricating oil to separate from water and resist emulsification. This is one of the most important performance characteristic for Lubricating oil for applications involving water contamination and turbulence. Water separability is determined by stirring equal volume of water and sample together at a controlled temperature to form an emulsion and observing the time required for separation of the emulsion to occur. This method is suitable for petroleum oils and synthetic fluids. Construction - Double Walled Construction with toughened glass observation window. Circulation system – Heavy duty capacitor run motor with stirrer to help maintain uniform temperature across bath media. Heater – immersion heater fitted to help achieve above ambient temperature. Heater connected to PID output heater wiring done using Teflon coated cable Temperature controller & instrumentation – fully automatic microprocessor based PID controller having feather touch key board. Display indicating temperature with resolution of 0.01& the controller is having splash proof membrane with PT -100 sensors. Features Illumination from back side. 4 Nos. Herschel Emulsifier. Stirrer can be easily moved to each test position instead of moving the samples. Digital temperature controller with speed and timer Timer stops the stirring on completion of set time i.e. 5 minutes automatically with alarm. Temperature: Ambient to 100°C, ± 0.5°C. Speed up to 1500 rpm, ± 15 rpm Power supply: 120 V / 230 Volts , Single Phase AC , 50/60 Hz

Cold Filter Plugging Point Apparatus as per ASTM D6371; IP 309, 419; EN 116 The Cold Filter Plugging Point (CFPP) Apparatus determines low temperature flow characteristics of diesel fuels, gas oils and other distillate fuels. It comprises a 4 liter dry ice bath (Dewar Flask) and a CFPP test insert connected via a three way cock to a UKAS certified digital manometer and two 5 litre pressure equalising vessels

Acrylic Body Rotameters are machined from clear acrylic block. They are designed to give maximum accuracy in visibility and ruggedness. The floats are made from Stainless Steel, PVC and other non corrosive plastics and offered as per the process requirement. The needle valve is provided for accurate flow control. It is designed to give accuracy of within 1.5 to 2 % at full scale. The higher accuracy can be made on specific requirement. The Rotameter can be fitted with Top / Bottom or rear connections as per specific requirement. The Rotameters are ideal for direct panel mounting because of their clear modular appearance, online installation is also possible.

Inclined Tube Manometers are used for accurate measurement of low pressure viz. draft and very low pressure differentials. Inclined Tube Manometers spread the pressure measurement range over a relatively long scale. Inclined Tube manometers are made in Acrylic Body / Glass Tube housed in Metal Casing. Available Sizes : 0 - 10 mm wc to 0 – 500 mm wc Application : Ideal for filter applications, Ventilation and air conditioning systems and Laminar Air Flow Systems

As per ASTM D3527 ,D4290, D4950. The equipment is used for testing of grease for evaluating its life performance by testing at high-temperature. The equipment consists of a modified front wheel hub-spindle-bearings assembly housed in a constant temperature oven and coupled to a ¼ Hp variable-speed drive motor. It Control the test functions automatically and provides continuous digital display of motor torque, rpm, chamber temperature, spindle temperature, time cycle and elapsed time. Test parameters outside of ASTM specifications can be selected by the operator for in-house testing. Automatically terminates test and displays elapsed on-cycle hours when grease deterioration causes drive motor torque to increase to the calibrated end point. A built-in thirty second time delay circuit prevents erroneous test terminations due to momentary surges in motor torque at the beginning of the on-cycle. Insulated constant temperature oven is equipped with a 1200W heater and balanced 1/20 hp circulation fan for efficient heat distribution. Sliding access doors and a movable platform that swings the drive motor out of the way provide easy access to the spindle assembly. Modified steel spindle and hub assembly conforms to all critical 1971 Chevy II dimensions and is fitted with thermocouple, bearing thrust loading device and anodized aluminum grease collector. All controls and monitors are housed in a separate cabinet. Digital controls and displays: Timer : on/off cycle and real time Motor rpm : 0-1725 rpm Motor Torque: current draw Elapsed Time: 9999.9 hr. Maximum Temperature: 177°C Electrical Requirements 220-240V 50Hz, Single Phase, 7A Included Accessories Thermocouples (2) Thermometer holder Bearings (1 set) Grease Packer Assembly Bearing Installation/Removal Tools: Bearing installer, small and large bearing cup removers, bearing cup installer, bearing puller and spindle wrenches (pins)

As per ASTM 445, D446, IP 71, DIN51550 Construction – Inner bath made stainless steel 304, outer body made of stainless steel with glass window ( Fully Stainless Steel Model). Alternatively Outer body can be made of Mild Steel Powder Coated. ( Standard Model ) Circulation system – Heavy duty capacitor run motor with stirrer to help maintain uniform temperature across bath media. Heater – immersion heater fitted to help achieve above ambient temperature. Heater connected to PID output heater wiring done using Teflon coated cable. Temperature controller & instrumentation - Eurotherm make fully automatic microprocessor based PID controller having feather touch key board. Display indicating temperature with resolution of 0.02°C & the controller is having splash proof membrane with PT -100 sensors.

Grease Making Bath Design Capacity : 5 Kg , 10 Kg and 15 Kg Grease by Batch Process. Open Kettle Type Grease Bath : This equipment is used for manufacturing grease on lab scale which can be used by Grease Manufacturers for research and development activities on lab scale. Construction : Outer and inner cylindrical vessel / kettle made with fully stainless steel having designed capacity for grease making. Heating System : Specially Designed Air heates fitted to achieve above ambient temperature. Heaters are inter-connected to the PID output. Heater wiring is done using PTFE coated cables. Stirring System : three phase gear motor having 300 rpm with speed regulator drive system. Temperature Controller and Instrumentation: Fully automatic microprocessor based PID controller having feather touch key board. Display indicating temperature with resolution of 0.1 Celsius. The controller is having splash proof membrane with pt-100 sensor. SALIANT FEATURE : Efficient stirring system. Excellent temperature uniformity in the bath Unit for temperature accuracy ±02 Temperature range : 40 ? to + 275? Power supply : 120 V / 230 ±10 %volt AC, 1 Phase, 50/60 Hz

The Water Jacketed Oven is used for wide range of applications like incubating, tempering, thermal storage and for drying of inflammable material. Features Control System : Micro-PID digital with PT-100 sensor. Chamber Heater : 2.0 Kw. Temperature range : Above ambient to 90°C , ± 1°C Power supply : 415 +10% Volt AC, 3 Phase, 50 Hz MOC inner : 304 Stainless steel MOC outer : Epoxy Powder Coating Working Size : 45 W x 45 D x 45 H CMS. Customised Size of Oven can be offered.

As per ASTM D-2300, BS 5797:1986, IEC 628:1985 Gassing Tendency Apparatus measures the tendency of insulating oil / liquids to evolve or absorb gas when subjected in cells having specific geometrics, electrical stress of sufficient intensity to cause an electric discharge through a gas phase in which a gas oil interface is located. Fully Made with Stainless Steel Assembly Gassing cell and gas burette assembly made of borosilicate glass with a relative permittivity of 5 ± 0.2 at 80°C. Hollow high-voltage electrode-made of centre less-ground and polished stainless steel with stainless steel capillary tubing as a gas passage. The electrode is supported by PTFE Plug Constant temperature oil bath with a heating and circulation with digital temperature control system. Transparent safety shield-made of clear view acrylic sheet. Power supply : 120 V / 230 Volt AC, 1 Phase, 50/60 Hz

Tergotometer is used for testing of detergents, enzymes, additives, surfactants, cleaners for textiles and other materials. Tergotometer has constant temperature bath with Stainless Steel inner working chamber. Outer Body can be made with Epoxy Powder Coated or with Stainless Steel. Temperature of water bath is controlled by digital temperature controller. The Agitator is driven by DC motor with gear box. Tergotometer with different temperature range can be offered for specific applications. We also offer CE Certified Tergotometer.