Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108045133049 (International callers) or 08045133049 (Indian callers).
Product Overview
The Three Layer Vacuum Drying Oven is designed for lithium-ion battery manufacturing and R&D applications, where precise temperature control and deep vacuum conditions are essential for the removal of residual moisture and solvents from battery materials.
This system provides uniform heating, controlled vacuum drying, and oxidation-free processing, making it suitable for drying anode, cathode, electrode sheets, and other moisture-sensitive battery components.
The three-layer construction ensures superior thermal insulation, stable process conditions, and high energy efficiency, meeting the stringent requirements of modern battery production environments.
Three Layer Construction – Key Advantage
The oven features a three-layer chamber design:
Inner Working Chamber
Stainless Steel (SS 316 / SS 304) construction
Corrosion resistant and contamination-free
Easy to clean and suitable for battery materials
Intermediate Heating & Insulation Layer
Uniform heat distribution
Minimizes temperature gradients
Improves process repeatability
Outer Insulated Casing
Powder-coated mild steel body
Reduces heat loss and surface temperature
Enhances operator safety
This design ensures excellent temperature uniformity and energy efficiency, even during extended drying cycles.
Heating System
Electric heaters embedded in the intermediate layer
Suitable for continuous and batch drying processes
Temperature range configurable as per application
Typical Operating Range:
Ambient +10°C to 200°C / 250°C (customizable)
Applications
Lithium-ion battery electrode drying
Cathode and anode material preparation
Battery material R&D laboratories
Pilot production and small-scale manufacturing
Drying of moisture-sensitive and solvent-based materials and batch drying processes.
Why Choose Our Three Layer Vacuum Drying Oven
Designed specifically for Li-ion battery processes
Robust stainless steel construction
Stable vacuum and uniform heating
Custom-built solutions for R&D and production
Reliable performance with long service life.
Support & Customisation
We offer custom design, installation support, operator training, and after-sales service.
Chamber size, temperature range, vacuum level, and control architecture can be tailored to your process requirements.
As per ASTM D-2300, BS 5797:1986, IEC 628:1985
Gassing Tendency Apparatus measures the tendency of insulating oil / liquids to evolve or absorb gas when subjected in cells having specific geometrics, electrical stress of sufficient intensity to cause an electric discharge through a gas phase in which a gas oil interface is located.
Fully Made with Stainless Steel Assembly
Gassing cell and gas burette assembly made of borosilicate glass with a relative permittivity of 5 ± 0.2 at 80°C.
Hollow high-voltage electrode-made of centre less-ground and polished stainless steel with stainless steel capillary tubing as a gas passage. The electrode is supported by PTFE Plug
Constant temperature oil bath with a heating and circulation with digital temperature control system.
Transparent safety shield-made of clear view acrylic sheet.
Power supply : 120 V / 230 Volt AC, 1 Phase, 50/60 Hz
Rotameters are devices which measure the flow rate of liquid or gas in a closed tube. This product is machined from clear acrylic block and is designed to give maximum accuracy in visibility and ruggedness. The floats are made from stainless steel, PVC and other non corrosive materials. The needle valve is provided for accurate flow control. It is designed to give accuracy of 0.5 to 1% at full scale. The higher accuracy can be made on specific requirement.
Our Glass Tube Rotameter is a precision-engineered variable area flow meter designed for accurate, repeatable measurement of low to medium flow rates of gases and liquids. It operates on the float-and-tapered-tube principle, providing direct visual indication of flow rate without the need for external power.
Ideal for laboratory setups, pilot plants, test benches, gas distribution panels, and OEM integration, the rotameter offers simplicity, reliability, and long service life.
Key Features
Clear Borosilicate Glass Tube for high visibility and chemical resistance
Direct Reading Scale (LPM, LPH, SCFH, Nm³/hr or as required)
High Accuracy: Typically ±2% to ±4% of Full Scale
Panel / Line Mounting Options
SS 304 / SS 316 / Brass End Fittings
Integrated Needle Valve for precise flow regulation (optional)
Compact & Maintenance-Free Design
No External Power Required
Advantages
Simple and rugged construction
Economical solution for flow measurement
Easy installation and replacement
Suitable for transparent and clean fluids
Quick visual verification of flow status
