'astm d86 solvent distillation apparatus'

ASTM Solvent Distillation Apparatus is used to separate the mixture of liquid solvent and petroleum products. The appratus determines initial boiling point, final boiling point, dry point , % of residue remains and % of material recovered. It consists of a water bath having outer chamber made of epoxy powdear coated. Inner chamber made of stainless steel with condenser tube, heating unit with regulator for controlling the temperature, measuring cylinder, flask with IP standard and thermometer -10°C to 360°C. It is widely used in paint and coating industries, oil and solvent, other liquid mixture. Standard: IS 1448 (P-18), IP 123, ASTM D 86 Package Includes: ASTM distillation apparatus, flask,measuring cylinder 100 ml,manual and thermometer (-10°C to 360°C)

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

As per ASTM D4217 , DIN 55990- P8 Gel Time Apparatus is used for determination gel time of powder coating or sample at which time it turns into gel on a polished metal surface at specific temperature. Gel time is the time at which the sample turns into gel from solid and it is not able to be used further. Gel time apparatus is made from non corrosive material. The top plate is made up of aluminium and it is provided with a sensor. It has a long lasting heating coil, temperature controller and digital timer display. It is widely used in plastic industries, powder coating.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Cold Filter Plugging Point Apparatus as per ASTM D6371; IP 309, 419; EN 116 The Cold Filter Plugging Point (CFPP) Apparatus determines low temperature flow characteristics of diesel fuels, gas oils and other distillate fuels. It comprises a 4 liter dry ice bath (Dewar Flask) and a CFPP test insert connected via a three way cock to a UKAS certified digital manometer and two 5 litre pressure equalising vessels

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Water Washout Tester As per ASTM D1264 The water washout apparatus is suitable for testing water washout characteristics of grease as per ASTM D1264. A sample of the lubricating grease under evaluation is tested in a bearing rotating under specific speed by spraying heated water and the loss of grease is determined. A tank is provided to hold about 750 ml of water with heating arrangement for heating the water to up to temperature 80°C. The equipment is provided with test bearing housing assembly as specified in the test method. The digital temperature controller with sensor is also provided for accurate indication of the temperature inside the equipment. The unit is provided with a ball bearing (ASTM 204) as specified in the test method. Circulating pump provided with a supply pressure and a return suction line, regulating valves, a splash nozzle and accessory.The pump is capable of delivering 300 ml/min heated water via 1mm capillary. The water containing washed out grease is collected in the tank, filtered & recycled during the test. Provision is made for fine adjustable of water flow through a bypass to allow the preheated water to circulate without passing through the jet or impinge on bearing housing. Features The bearing rotational speed is 600 ± 30 rpm. Supplied with test bearings – 2 Nos. Drain valve to remove the tested water. Provided with necessary tools and fixtures for assembling of bearing housing. Power supply : 120 V / 230 AC, Single Phase, 50 / 60 Hz

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

The Digital Bulk Density Apparatus is a microprocessor based instrument designed to study the packing down of powder beds of different pharmaceutical & chemical powders and gives accurate & repeatability of the result. Bulk Density is an essential test required in the process of Tablet manufacturing, capsules filling and cosmetics manufacturing as important part of quality control program. 4 digit microprocessor based Pre-set counter provided to set exact no of strokes. This feature eliminates the tedious calculation of Timer Mode. A common holder for both the cylinder drops down smoothly from the specified height. Easy to lock cushioned holders are provided to hold the cylinder. In power failure, the non-volatile memory of the microprocessor remember the last mode of operation, and complete the test after the power supply is resumed. It has the following features: Specifications : » Display: Digital 12 mm Red LED » Speed range - 30RPM Mechanical Timer/Digital counter as per requirement.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

The Taber Abrasion Tester is used to determine the abrasion resistance of organic coatings produced on a plane, rigid surface. The sample panel can be 100 mm diameter disc or 100 × 100 mm square panel with rounded corners and a 6.3 mm center hole. The weighted specimen is mounted on a turntable disc, while the abrasive wheel applies load on the test film. The abrasion resistance varies according to the applied load. This tester is widely used in quality & process control, R&D, and material evaluation across industries such as coatings, textiles, leather, rubber, plastics, wood, glass, paper, laminates, and ceramics. Standards: ASTM D4060, ISO 9352 Key Features: Easy-to-use control panel with Total Count & Batch Count display Vacuum pump system with suction hose for direct flow between hose & rotating disc Release Wheel Hub for quick mounting without tools Balanced calibration arms & wheel mounts with high precision weights Technical Specifications: Platform Speed: 60 ± 2 rpm Auxiliary Weights: 250 gm, 500 gm & 1000 gm (two sets, one per arm) Counterweights: 125 gm & 175 gm (two sets, one per arm) Abrasive Wheels: CS10, CS17 (USA Taber Make – any one) Material: Mild Steel body with durable powder coating; holding arms, counter & auxiliary weights, base disc made of stainless steel. Package Includes: Taber Abrasion Tester Auxiliary weights & counterweights Taber abrasive wheel (CS10) Vacuum pump with suction hose Operation manual Calibration certificate Spares

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: