'digital mass flowmeter'

The Digital Bulk Density Apparatus is a microprocessor based instrument designed to study the packing down of powder beds of different pharmaceutical & chemical powders and gives accurate & repeatability of the result. Bulk Density is an essential test required in the process of Tablet manufacturing, capsules filling and cosmetics manufacturing as important part of quality control program. 4 digit microprocessor based Pre-set counter provided to set exact no of strokes. This feature eliminates the tedious calculation of Timer Mode. A common holder for both the cylinder drops down smoothly from the specified height. Easy to lock cushioned holders are provided to hold the cylinder. In power failure, the non-volatile memory of the microprocessor remember the last mode of operation, and complete the test after the power supply is resumed. It has the following features: Specifications : » Display: Digital 12 mm Red LED » Speed range - 30RPM Mechanical Timer/Digital counter as per requirement.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Water Washout Tester As per ASTM D1264 The water washout apparatus is suitable for testing water washout characteristics of grease as per ASTM D1264. A sample of the lubricating grease under evaluation is tested in a bearing rotating under specific speed by spraying heated water and the loss of grease is determined. A tank is provided to hold about 750 ml of water with heating arrangement for heating the water to up to temperature 80°C. The equipment is provided with test bearing housing assembly as specified in the test method. The digital temperature controller with sensor is also provided for accurate indication of the temperature inside the equipment. The unit is provided with a ball bearing (ASTM 204) as specified in the test method. Circulating pump provided with a supply pressure and a return suction line, regulating valves, a splash nozzle and accessory.The pump is capable of delivering 300 ml/min heated water via 1mm capillary. The water containing washed out grease is collected in the tank, filtered & recycled during the test. Provision is made for fine adjustable of water flow through a bypass to allow the preheated water to circulate without passing through the jet or impinge on bearing housing. Features The bearing rotational speed is 600 ± 30 rpm. Supplied with test bearings – 2 Nos. Drain valve to remove the tested water. Provided with necessary tools and fixtures for assembling of bearing housing. Power supply : 120 V / 230 AC, Single Phase, 50 / 60 Hz

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Kinematic Viscosity Bath As per ASTM D 445, ASTM D 446, IP 71 The Viscosity Bath is a precision-engineered device designed to measure the kinematic viscosity of petroleum products. It uses calibrated capillary viscometers to determine flow under gravity or vacuum at precisely controlled temperatures. This ensures accurate viscosity measurements, critical for the design and selection of various petroleum products. Key Features : Precise Kinematic Viscosity Measurement: Designed for accurate measurement of kinematic viscosity in petroleum products. Utilizes calibrated capillary viscometers for reliable flow measurement. Robust Construction: A rectangular model with double-walled construction ensures durability and effective temperature control .Toughened glass observation window (254 W x 225 H mm) allows clear visibility of the process. Illumination: Rear side illumination enhances visibility and ease of operation. Efficient Heating : Equipped with an oil immersion heater for uniform heating. Versatile Bath Opening: Bath opening size: 254 x 200 mm. Cover with six openings (50 mm in diameter) to accommodate six viscometers with Bakelite holders. Large Liquid Capacity: A liquid capacity of 22 liters ensures ample volume for various tests. Advanced Temperature Control: Microprocessor-based PID temperature controller with PT-100 sensor. Digital readout with a resolution and temperature accuracy of 0.02°C. Temperature settings: 40°C and 100°C for diverse testing needs. Efficient Stirring System: Ensures uniform temperature distribution throughout the bath. Power Supply: Operates on a standard power supply of 230 V, 1 Phase, 50 Hz. Applications: Petroleum Industry : Essential for designing and selecting various petroleum products based on their kinematic viscosity. Research and Development: Ideal for laboratories conducting viscosity tests on oils and lubricants. Quality Control: Ensures compliance with industry standards and specifications. Contact Us: For inquiries, pricing, and detailed specifications, please contact our sales team

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Salt Spray Corrosion Cabinet : A thermostatic dome-shaped Salt Spray Cabinet, designed for evaluating the corrosion resistance of surface coatings in a controlled, accelerated environment. This apparatus simulates salt-laden atmospheres to assess the durability of coatings like paints, plating, and galvanizing. Key Features: Thermostatic Design: Dome-shaped corrosion-resistant chamber made from 6 mm thick imported Perspex sheet for maximum durability and transparency. Temperature Control: Microprocessor-based PID Digital Temperature Indicator cum Controller Built-in Digital Timer with Memory Backup Heating System: High-efficiency Heater with Sensor Supplied with One Spare Heater Spray Mechanism: Atomizing Nozzles for fine mist generation Tray and Hanging Arrangement provided as per standard specifications (Air Compressor to be arranged separately) Safety and Compliance: Low Water Level Safety: Water Level Sensor with Alarm Indicator and Buzzer Thermal Protection: Built-in Thermostat for over-temperature protection Additional Accessories: Fog Collection Device for salt fog measurement

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

High Speed Disperser – Table Top Model The High Speed Disperser is a compact, table-top mixing solution designed for efficient dispersion of powders into liquids and for dissolving soluble solids. It rapidly breaks apart agglomerates and wets out particles, making it ideal for laboratory-scale mixing and dispersion tasks. Key Features: Table Top Model: Compact and space-saving design suitable for laboratory environments. Motor: Equipped with a Three Phase, Forced Cooled Induction Motor ensuring consistent performance and durability during extended use. Control System: Integrated Variable Frequency Drive (VFD) for adjustable speed control and a Digital Timer Controller for precision and repeatability. Stirrer: Supplied with one (1) 50 mm SS304 Cowl-Type Stirrer for optimal mixing and dispersing action. Tip Speed: Achieves a tip speed in the range of 12 to 18 meters per second, suitable for effective dispersion and grinding. Capacity: Designed for handling 2 to 4 liters of dispersion volume using suitable grinding media. Note: A sturdy laboratory platform or table is to be arranged by the user for stable operation of the disperser. Salient Features- ➢ RPM : 0000 to 4850 Step less variation by VFD. Digital Display of RPM on VFD Panel ➢ Clamping : Manual in “V” Shaped Clamping ➢ Vertical Traverse : Manual Operation eased by counterweight Mechanism & LM slide ➢ Main Supply : 415/430 VAC and 50/60 Hz ➢ Digital Timer : 99 mins 59 secs with memory backup function

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

High speed dispersers is a type of mixer used to rapidly break apart lumps of powder material, and wetting them in a liquid. It is also used to dissolve solube solids in a liquid. A High Speed Dispersers is a Table Top Model with a Three Phase Induction Forced Cooled Motor controlled by Variable Frequency Driver and a Digital Timer Controller. Sturdy Laboratory platform is to be arranged by you. One nos “50 mm SS304 Cowl Type Stirrer’’ will be supplied with the machine. Dispersion of 2/4 ltr volume grinding media with a Tip Speed of 12-18 mps

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Salt Spray Corrosion Cabinet : Thermostatic dome shaped model. Thermostatically controlled within built microprocessor digital temperature indicator cum controller with timer. Made from Imported 6 mm thick Perspex sheet. Supplied with suitable tray, Nozzle & Hanging arrangement (without compressor) Apparatus consists of : ● Salt Spray Chamber ● PID Digital Temperature indicator cum controller ● Digital Timer with memory backup ● Heater and Sensor with one spare heater. ● Atomizing Nozzles ● Hanging arrangement with tray as per Standard ● Safety Feature water level sensor for low reservoir alarm with indicator cum buzzer ● Thermostat for Temperature regulator ● Fog Collection Device

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

As per ASTM D4217 , DIN 55990- P8 Gel Time Apparatus is used for determination gel time of powder coating or sample at which time it turns into gel on a polished metal surface at specific temperature. Gel time is the time at which the sample turns into gel from solid and it is not able to be used further. Gel time apparatus is made from non corrosive material. The top plate is made up of aluminium and it is provided with a sensor. It has a long lasting heating coil, temperature controller and digital timer display. It is widely used in plastic industries, powder coating.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Cold Filter Plugging Point Apparatus as per ASTM D6371; IP 309, 419; EN 116 The Cold Filter Plugging Point (CFPP) Apparatus determines low temperature flow characteristics of diesel fuels, gas oils and other distillate fuels. It comprises a 4 liter dry ice bath (Dewar Flask) and a CFPP test insert connected via a three way cock to a UKAS certified digital manometer and two 5 litre pressure equalising vessels

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: