Name: Acrylic Body Rotameter
Availability: instock

Acrylic Body Rotameter

Acrylic Body Rotameters are machined from clear acrylic block. They are designed to give maximum accuracy in visibility and ruggedness. The floats are made from Stainless Steel, PVC and other non corrosive plastics and offered as per the process requirement. The needle valve is provided for accurate flow control. It is designed to give accuracy of within 1.5 to 2 % at full scale. The higher accuracy can be made on specific requirement. The Rotameter can be fitted with Top / Bottom or rear connections as per specific requirement. The Rotameters are ideal for direct panel mounting because of their clear modular appearance, online installation is also possible.

Send Message

Rotameter

Metal Tube Rotameter

INR 8000

Send Message

Flowmeters

Glass Tube Rotameter

INR 2500

Send Message

Rotameter , Acrylic Body Rotameter,Panel Rotameter

Rotameter

INR 1000

Send Message

Rotameter

R134a Refrigerent Rotameter

R134a Rotameter

Send Message

Water Spray Off Tester

WATER SPRAY OFF TESTER As per ASTM D 4049 Water spray off tester evaluates the ability of a lubricating grease to adhere to a metal surface when subjected to a direct water spray under controlled conditions. The percentage of grease sprayed off a stainless steel test panel after a specified period is determined by weight. - It Conforms to ASTM D4049 specifications The equipment including spray chamber, delivery system and constant temperature reservoir. It Sprays water at the specified rate and temperature on a test panel coated with sample grease. To test for water spray resistance, fill reservoir with 8L of tap water and set the temperature comtroller at test temperature. Circulate the water through the system to attain temperature equilibrium and insert the coated test panel in the spray chamber. Adjust water spray to 40psi (276kPa) and continue for 5 minutes. Water spray system includes 1.3hp positive displacement pump; spray nozzle with snubber fitting: 0-60psi pressure gauge; bypass valve; shut-off and drain valves; and flexible high pressure water lines. Hinged acrylic spray chamber cover is recessed into the chamber housing to insure watertight operation. Standardized grease application fixture coats test panel with the required thickness of sample grease. Uses tap water; does not require water hook-up. The system includes: Stainless steel test panel Grease application fixture Thermometer holders Pressure gauge Salient feature – Dital Temperature Controller Unit for temperature accuracy 0.03°C Temperature range : 35.00 to 150.0°C Power supply: 230 Volt AC. 1 phase, 50Hz Country of Origin : India

Send Message

Grease Testing Equipment

Drop Point of Grease Wide High Temperature Range

Drop Point of Grease Wide High Temperature Range The ASTM D2265 dropping point tester is used for high temperature grease testing than the ASTM D566 method. This equipment uses a different heating procedure as compared with ASTM D566. The test cell is inserted in an aluminum block oven maintained at a constant temperature that is higher than the expected dropping point of the sample. The sample temperature then rises to the dropping point without operator control. The equipment can be offered with Two / Four / Six sample testing capability. Maximum Temperature is 400 °C.

Send Message

Leakage Tendencies of Wheel Bearing Grease Tester

Leakage Tendencies of Wheel Bearing Grease tester, As per ASTM D 1263 This test method for Grease testing determines the tendency of grease to separate oil or grease under prescribed laboratory operating conditions. The test is performed at a high temperature in a modified automotive spindle-hub assembly rotated at the speed of 660 rpm. Any leakage of oil or grease during the test period is collected and weighed. The equipment is made of stainless steel oven with forced air circulation.The temperature is controlled by PID Controller. The accessories included are Wheel bearing spindle, front wheel hub, driving belt pulley, grease leakage collector, front roller bearing, rear roller bearing.