Name: Drop Point of Grease Wide High Temperature Range
Availability: instock

Drop Point of Grease Wide High Temperature Range

Drop Point of Grease Wide High Temperature Range The ASTM D2265 dropping point tester is used for high temperature grease testing than the ASTM D566 method. This equipment uses a different heating procedure as compared with ASTM D566. The test cell is inserted in an aluminum block oven maintained at a constant temperature that is higher than the expected dropping point of the sample. The sample temperature then rises to the dropping point without operator control. The equipment can be offered with Two / Four / Six sample testing capability. Maximum Temperature is 400 °C.

Send Message

Grease Testing Equipment

Water Washout Tester

Water Washout Tester As per ASTM D1264 The water washout apparatus is suitable for testing water washout characteristics of grease as per ASTM D1264. A sample of the lubricating grease under evaluation is tested in a bearing rotating under specific speed by spraying heated water and the loss of grease is determined. A tank is provided to hold about 750 ml of water with heating arrangement for heating the water to up to temperature 80°C. The equipment is provided with test bearing housing assembly as specified in the test method. The digital temperature controller with sensor is also provided for accurate indication of the temperature inside the equipment. The unit is provided with a ball bearing (ASTM 204) as specified in the test method. Circulating pump provided with a supply pressure and a return suction line, regulating valves, a splash nozzle and accessory.The pump is capable of delivering 300 ml/min heated water via 1mm capillary. The water containing washed out grease is collected in the tank, filtered & recycled during the test. Provision is made for fine adjustable of water flow through a bypass to allow the preheated water to circulate without passing through the jet or impinge on bearing housing. Features The bearing rotational speed is 600 ± 30 rpm. Supplied with test bearings – 2 Nos. Drain valve to remove the tested water. Provided with necessary tools and fixtures for assembling of bearing housing. Power supply : 120 V / 230 AC, Single Phase, 50 / 60 Hz

Send Message

Salt Spray Chamber

Salt Spray Corrosion Cabinet : A thermostatic dome-shaped Salt Spray Cabinet, designed for evaluating the corrosion resistance of surface coatings in a controlled, accelerated environment. This apparatus simulates salt-laden atmospheres to assess the durability of coatings like paints, plating, and galvanizing. Key Features: Thermostatic Design: Dome-shaped corrosion-resistant chamber made from 6 mm thick imported Perspex sheet for maximum durability and transparency. Temperature Control: Microprocessor-based PID Digital Temperature Indicator cum Controller Built-in Digital Timer with Memory Backup Heating System: High-efficiency Heater with Sensor Supplied with One Spare Heater Spray Mechanism: Atomizing Nozzles for fine mist generation Tray and Hanging Arrangement provided as per standard specifications (Air Compressor to be arranged separately) Safety and Compliance: Low Water Level Safety: Water Level Sensor with Alarm Indicator and Buzzer Thermal Protection: Built-in Thermostat for over-temperature protection Additional Accessories: Fog Collection Device for salt fog measurement

Send Message

Dispersing Machine

High-Speed Dispersing Machine - Lab Scale Table Top Model

High Speed Disperser – Table Top Model The High Speed Disperser is a compact, table-top mixing solution designed for efficient dispersion of powders into liquids and for dissolving soluble solids. It rapidly breaks apart agglomerates and wets out particles, making it ideal for laboratory-scale mixing and dispersion tasks. Key Features: Table Top Model: Compact and space-saving design suitable for laboratory environments. Motor: Equipped with a Three Phase, Forced Cooled Induction Motor ensuring consistent performance and durability during extended use. Control System: Integrated Variable Frequency Drive (VFD) for adjustable speed control and a Digital Timer Controller for precision and repeatability. Stirrer: Supplied with one (1) 50 mm SS304 Cowl-Type Stirrer for optimal mixing and dispersing action. Tip Speed: Achieves a tip speed in the range of 12 to 18 meters per second, suitable for effective dispersion and grinding. Capacity: Designed for handling 2 to 4 liters of dispersion volume using suitable grinding media. Note: A sturdy laboratory platform or table is to be arranged by the user for stable operation of the disperser. Salient Features- ➢ RPM : 0000 to 4850 Step less variation by VFD. Digital Display of RPM on VFD Panel ➢ Clamping : Manual in “V” Shaped Clamping ➢ Vertical Traverse : Manual Operation eased by counterweight Mechanism & LM slide ➢ Main Supply : 415/430 VAC and 50/60 Hz ➢ Digital Timer : 99 mins 59 secs with memory backup function

Send Message

Dispersing Machine

High-Speed Dispersing Machine

High speed dispersers is a type of mixer used to rapidly break apart lumps of powder material, and wetting them in a liquid. It is also used to dissolve solube solids in a liquid. A High Speed Dispersers is a Table Top Model with a Three Phase Induction Forced Cooled Motor controlled by Variable Frequency Driver and a Digital Timer Controller. Sturdy Laboratory platform is to be arranged by you. One nos “50 mm SS304 Cowl Type Stirrer’’ will be supplied with the machine. Dispersion of 2/4 ltr volume grinding media with a Tip Speed of 12-18 mps

Send Message

Salt Spray Chamber

Salt Spray Corrosion Cabinet : Thermostatic dome shaped model. Thermostatically controlled within built microprocessor digital temperature indicator cum controller with timer. Made from Imported 6 mm thick Perspex sheet. Supplied with suitable tray, Nozzle & Hanging arrangement (without compressor) Apparatus consists of : ● Salt Spray Chamber ● PID Digital Temperature indicator cum controller ● Digital Timer with memory backup ● Heater and Sensor with one spare heater. ● Atomizing Nozzles ● Hanging arrangement with tray as per Standard ● Safety Feature water level sensor for low reservoir alarm with indicator cum buzzer ● Thermostat for Temperature regulator ● Fog Collection Device

Send Message

Abel Flash Point Tester

Abel Flash Point Apparatus. Electrically operated having Thermostatic control As per IP 33, 170 & IS 1448 (PT I) For Determination of flash point of petroleum products and mixture having flash point below 49°C ( 120°F ) The apparatus consists of Brass Cup fitted with test flame arrangement. Stirrer is placed for maual stirring during testing. The Outer Jacket of the water bath is fitted with a stand. Heating is by 500 watts coil heater fitted to the stand. Heating is controlled by Energy Regulator. Country of Origin : INDIA

Send Message

Water Spray Off Tester

WATER SPRAY OFF TESTER As per ASTM D 4049 Water spray off tester evaluates the ability of a lubricating grease to adhere to a metal surface when subjected to a direct water spray under controlled conditions. The percentage of grease sprayed off a stainless steel test panel after a specified period is determined by weight. - It Conforms to ASTM D4049 specifications The equipment including spray chamber, delivery system and constant temperature reservoir. It Sprays water at the specified rate and temperature on a test panel coated with sample grease. To test for water spray resistance, fill reservoir with 8L of tap water and set the temperature comtroller at test temperature. Circulate the water through the system to attain temperature equilibrium and insert the coated test panel in the spray chamber. Adjust water spray to 40psi (276kPa) and continue for 5 minutes. Water spray system includes 1.3hp positive displacement pump; spray nozzle with snubber fitting: 0-60psi pressure gauge; bypass valve; shut-off and drain valves; and flexible high pressure water lines. Hinged acrylic spray chamber cover is recessed into the chamber housing to insure watertight operation. Standardized grease application fixture coats test panel with the required thickness of sample grease. Uses tap water; does not require water hook-up. The system includes: Stainless steel test panel Grease application fixture Thermometer holders Pressure gauge Salient feature – Dital Temperature Controller Unit for temperature accuracy 0.03°C Temperature range : 35.00 to 150.0°C Power supply: 230 Volt AC. 1 phase, 50Hz Country of Origin : India

Send Message

Digital Bulk Density Apparatus

The Digital Bulk Density Apparatus is a microprocessor based instrument designed to study the packing down of powder beds of different pharmaceutical & chemical powders and gives accurate & repeatability of the result. Bulk Density is an essential test required in the process of Tablet manufacturing, capsules filling and cosmetics manufacturing as important part of quality control program. 4 digit microprocessor based Pre-set counter provided to set exact no of strokes. This feature eliminates the tedious calculation of Timer Mode. A common holder for both the cylinder drops down smoothly from the specified height. Easy to lock cushioned holders are provided to hold the cylinder. In power failure, the non-volatile memory of the microprocessor remember the last mode of operation, and complete the test after the power supply is resumed. It has the following features: Specifications : » Display: Digital 12 mm Red LED » Speed range - 30RPM Mechanical Timer/Digital counter as per requirement.