'tablet disintegration test apparatus'

Disintegration Tester is a solid state instrument designed for the accurate estimation of disintegration time of tablets as per IP/USP standards. The instrument is designed to test two batches of six tablets, simultaneously. The unit is extremely useful for pharmaceutical industries. It is used in quality control and R & D to determine compliance with the disintegration requirement of the tablet and capsule as per USP/BP/IP standards. Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts, which guide you throughout the measurement process. Specifications: » Complies with USP, IP specifications » Extremely useful for pharmaceutical labs » Highly Accurate and Easy to Operate » Baskets UP & DOWN movement as per IP/USP Specifications » 20 x 4 Line Alphanumeric LCD with Backlit » 15 Soft Touch Membrane Type Keys

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

The Digital Bulk Density Apparatus is a microprocessor based instrument designed to study the packing down of powder beds of different pharmaceutical & chemical powders and gives accurate & repeatability of the result. Bulk Density is an essential test required in the process of Tablet manufacturing, capsules filling and cosmetics manufacturing as important part of quality control program. 4 digit microprocessor based Pre-set counter provided to set exact no of strokes. This feature eliminates the tedious calculation of Timer Mode. A common holder for both the cylinder drops down smoothly from the specified height. Easy to lock cushioned holders are provided to hold the cylinder. In power failure, the non-volatile memory of the microprocessor remember the last mode of operation, and complete the test after the power supply is resumed. It has the following features: Specifications : » Display: Digital 12 mm Red LED » Speed range - 30RPM Mechanical Timer/Digital counter as per requirement.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Water Washout Tester As per ASTM D1264 The water washout apparatus is suitable for testing water washout characteristics of grease as per ASTM D1264. A sample of the lubricating grease under evaluation is tested in a bearing rotating under specific speed by spraying heated water and the loss of grease is determined. A tank is provided to hold about 750 ml of water with heating arrangement for heating the water to up to temperature 80°C. The equipment is provided with test bearing housing assembly as specified in the test method. The digital temperature controller with sensor is also provided for accurate indication of the temperature inside the equipment. The unit is provided with a ball bearing (ASTM 204) as specified in the test method. Circulating pump provided with a supply pressure and a return suction line, regulating valves, a splash nozzle and accessory.The pump is capable of delivering 300 ml/min heated water via 1mm capillary. The water containing washed out grease is collected in the tank, filtered & recycled during the test. Provision is made for fine adjustable of water flow through a bypass to allow the preheated water to circulate without passing through the jet or impinge on bearing housing. Features The bearing rotational speed is 600 ± 30 rpm. Supplied with test bearings – 2 Nos. Drain valve to remove the tested water. Provided with necessary tools and fixtures for assembling of bearing housing. Power supply : 120 V / 230 AC, Single Phase, 50 / 60 Hz

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Abel Flash Point Apparatus. Electrically operated having Thermostatic control As per IP 33, 170 & IS 1448 (PT I) For Determination of flash point of petroleum products and mixture having flash point below 49°C ( 120°F ) The apparatus consists of Brass Cup fitted with test flame arrangement. Stirrer is placed for maual stirring during testing. The Outer Jacket of the water bath is fitted with a stand. Heating is by 500 watts coil heater fitted to the stand. Heating is controlled by Energy Regulator. Country of Origin : INDIA

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Cold Filter Plugging Point Apparatus as per ASTM D6371; IP 309, 419; EN 116 The Cold Filter Plugging Point (CFPP) Apparatus determines low temperature flow characteristics of diesel fuels, gas oils and other distillate fuels. It comprises a 4 liter dry ice bath (Dewar Flask) and a CFPP test insert connected via a three way cock to a UKAS certified digital manometer and two 5 litre pressure equalising vessels

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

The Taber Abrasion Tester is used to determine the abrasion resistance of organic coatings produced on a plane, rigid surface. The sample panel can be 100 mm diameter disc or 100 × 100 mm square panel with rounded corners and a 6.3 mm center hole. The weighted specimen is mounted on a turntable disc, while the abrasive wheel applies load on the test film. The abrasion resistance varies according to the applied load. This tester is widely used in quality & process control, R&D, and material evaluation across industries such as coatings, textiles, leather, rubber, plastics, wood, glass, paper, laminates, and ceramics. Standards: ASTM D4060, ISO 9352 Key Features: Easy-to-use control panel with Total Count & Batch Count display Vacuum pump system with suction hose for direct flow between hose & rotating disc Release Wheel Hub for quick mounting without tools Balanced calibration arms & wheel mounts with high precision weights Technical Specifications: Platform Speed: 60 ± 2 rpm Auxiliary Weights: 250 gm, 500 gm & 1000 gm (two sets, one per arm) Counterweights: 125 gm & 175 gm (two sets, one per arm) Abrasive Wheels: CS10, CS17 (USA Taber Make – any one) Material: Mild Steel body with durable powder coating; holding arms, counter & auxiliary weights, base disc made of stainless steel. Package Includes: Taber Abrasion Tester Auxiliary weights & counterweights Taber abrasive wheel (CS10) Vacuum pump with suction hose Operation manual Calibration certificate Spares

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

The EMCOR Rust Tester is designed to determine the corrosion-preventive properties of lubricating greases on ball bearings in the presence of water or salt water. The system replicates real-world mechanical and environmental conditions by rotating and resting the bearings in a water medium. It is built to conform with IP 220 , DIN 51802 and ASTM D6138, enabling both dynamic and static corrosion testing of greases. Key Features: 4 / 6 / 8 test setup for testing of bearings simultaneously Bearing housing in SS 316 for high corrosion resistance Powder-coated outer body for long life Operates at 80 RPM with automatic rest/run cycles Includes plummer blocks, adapter sleeves, self-aligning bearings, and V-ring seals Microcontroller-based Run/Rest Timer. Scope of Supply: EMCOR Test Rig with Base Plate Electric Motor with Gear System SS Shaft and Support Assembly Plummer Blocks & Bearing Housings Self-Aligning Bearings Adapter Sleeves & V-Ring Seals Electronic Run/Stop Timer User Manual Applications: Corrosion Testing of Grease in Bearings R&D Labs in Lubricant Industry Grease Quality Control Labs Bearing Testing Facilities Tribology Research Institutes For Pricing and additonal details kindly write or call us.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: