Products

As per ASTM D-2300, BS 5797:1986, IEC 628:1985 Gassing Tendency Apparatus measures the tendency of insulating oil / liquids to evolve or absorb gas when subjected in cells having specific geometrics, electrical stress of sufficient intensity to cause an electric discharge through a gas phase in which a gas oil interface is located. Fully Made with Stainless Steel Assembly Gassing cell and gas burette assembly made of borosilicate glass with a relative permittivity of 5 ± 0.2 at 80°C. Hollow high-voltage electrode-made of centre less-ground and polished stainless steel with stainless steel capillary tubing as a gas passage. The electrode is supported by PTFE Plug Constant temperature oil bath with a heating and circulation with digital temperature control system. Transparent safety shield-made of clear view acrylic sheet. Power supply : 120 V / 230 Volt AC, 1 Phase, 50/60 Hz

Rotameters are devices which measure the flow rate of liquid or gas in a closed tube. This product is machined from clear acrylic block and is designed to give maximum accuracy in visibility and ruggedness. The floats are made from stainless steel, PVC and other non corrosive materials. The needle valve is provided for accurate flow control. It is designed to give accuracy of 0.5 to 1% at full scale. The higher accuracy can be made on specific requirement.

Our Glass Tube Rotameter is a precision-engineered variable area flow meter designed for accurate, repeatable measurement of low to medium flow rates of gases and liquids. It operates on the float-and-tapered-tube principle, providing direct visual indication of flow rate without the need for external power. Ideal for laboratory setups, pilot plants, test benches, gas distribution panels, and OEM integration, the rotameter offers simplicity, reliability, and long service life. Key Features Clear Borosilicate Glass Tube for high visibility and chemical resistance Direct Reading Scale (LPM, LPH, SCFH, Nm³/hr or as required) High Accuracy: Typically ±2% to ±4% of Full Scale Panel / Line Mounting Options SS 304 / SS 316 / Brass End Fittings Integrated Needle Valve for precise flow regulation (optional) Compact & Maintenance-Free Design No External Power Required Advantages Simple and rugged construction Economical solution for flow measurement Easy installation and replacement Suitable for transparent and clean fluids Quick visual verification of flow status

Cloud & pour point are indicators of the lowest temperature of utility for petroleum products. The sample is periodically examined while it is being cooled in the cloud & pour point apparatus. The highest temperature at which haziness is observed (cloud point) or the lowest temperature at which movement of the oil is observed (pour point) is reported as the test result. Single,Two, Three, Four and Five test chambers. Individual built in CFC-free single / cascade refrigeration system with eco-friendly refrigerant.

Penetrometer Penetrometer is a laboratory instrument used to determine the consistency (penetration value) of stiff and semi-solid materials in terms of DOP (Division of Penetrometer). The test is based on measuring the depth of penetration of a standard cone or plunger into the sample under its own weight for a specified time. The instrument consists of a precision circular dial calibrated in DOP, a plunger assembly, a standard cone with specified dimensions and mass, calibrated weights, and a sample cup. The penetration occurs due to gravitational force, and the depth achieved after a fixed time interval is directly read on the dial. Penetrometers are widely used for evaluating the consistency of lubricating greases, waxes, stiff paints, distempers, soils, and similar materials. Standards IP 50 ISO 2137 ASTM D 937 ASTM D 217 IS 1448 (P:60) Technical Specifications Dial Range: 0 – 400 DOP (1 mm penetration = 1 DOP) Timer (Digital Penetrometer only): 1 to 9 seconds Cup Size: Standard: 55 mm (H) × 55 mm (Dia) Optional: 100 mm (H) × 100 mm (Dia) Weights: 50 g and 100 g Cone Weight: 102 g Accessories Required for Testing Stopwatch Thermometer up to 110 °C Spatula Package Includes Penetrometer assembly Sample cup Standard cone Calibrated weights Dial gauge Calibration certificate Operation manual Standard spares This penetrometer is suitable for routine quality control as well as research and development applications where accurate and repeatable penetration measurements are required.

Durable and efficient Tray Dryer designed for uniform drying of products such as powders, chemicals, granules, food items, pharmaceuticals, and other industrial materials under controlled temperature. Constructed with double-walled insulation and fitted with high-quality heating elements, it ensures consistent performance with precise temperature control. Available in multiple tray capacities, ideal for laboratory and industrial applications.

Durable and efficient Tray Dryer designed for uniform drying of products such as powders, chemicals, granules, food items, pharmaceuticals, and other industrial materials under controlled temperature. Constructed with double-walled insulation and fitted with high-quality heating elements, it ensures consistent performance with precise temperature control. Available in multiple tray capacities, ideal for laboratory and industrial applications.

The Taber Abrasion Tester is used to determine the abrasion resistance of organic coatings produced on a plane, rigid surface. The sample panel can be 100 mm diameter disc or 100 × 100 mm square panel with rounded corners and a 6.3 mm center hole. The weighted specimen is mounted on a turntable disc, while the abrasive wheel applies load on the test film. The abrasion resistance varies according to the applied load. This tester is widely used in quality & process control, R&D, and material evaluation across industries such as coatings, textiles, leather, rubber, plastics, wood, glass, paper, laminates, and ceramics. Standards: ASTM D4060, ISO 9352 Key Features: Easy-to-use control panel with Total Count & Batch Count display Vacuum pump system with suction hose for direct flow between hose & rotating disc Release Wheel Hub for quick mounting without tools Balanced calibration arms & wheel mounts with high precision weights Technical Specifications: Platform Speed: 60 ± 2 rpm Auxiliary Weights: 250 gm, 500 gm & 1000 gm (two sets, one per arm) Counterweights: 125 gm & 175 gm (two sets, one per arm) Abrasive Wheels: CS10, CS17 (USA Taber Make – any one) Material: Mild Steel body with durable powder coating; holding arms, counter & auxiliary weights, base disc made of stainless steel. Package Includes: Taber Abrasion Tester Auxiliary weights & counterweights Taber abrasive wheel (CS10) Vacuum pump with suction hose Operation manual Calibration certificate Spares

Hot Air Oven : GMP Model GMP Models of Laboratory Ovens are used in Research and Development Lab of Pharmaceutical and Food Processing Industries. The Oven is constructed with Excellent quality Stainless Steel with combination of SS 304 / SS 316 , or Entirely made with SS 304 and SS 316 depending upon customer requirements. High Quality , long life Tubular Air Heaters are used for achieving desired temperature within stipulated time. PID Digital Temperature Controller is provided for accurate temperature control within the Oven.

The EMCOR Rust Tester is designed to determine the corrosion-preventive properties of lubricating greases on ball bearings in the presence of water or salt water. The system replicates real-world mechanical and environmental conditions by rotating and resting the bearings in a water medium. It is built to conform with IP 220 , DIN 51802 and ASTM D6138, enabling both dynamic and static corrosion testing of greases. Key Features: 4 / 6 / 8 test setup for testing of bearings simultaneously Bearing housing in SS 316 for high corrosion resistance Powder-coated outer body for long life Operates at 80 RPM with automatic rest/run cycles Includes plummer blocks, adapter sleeves, self-aligning bearings, and V-ring seals Microcontroller-based Run/Rest Timer. Scope of Supply: EMCOR Test Rig with Base Plate Electric Motor with Gear System SS Shaft and Support Assembly Plummer Blocks & Bearing Housings Self-Aligning Bearings Adapter Sleeves & V-Ring Seals Electronic Run/Stop Timer User Manual Applications: Corrosion Testing of Grease in Bearings R&D Labs in Lubricant Industry Grease Quality Control Labs Bearing Testing Facilities Tribology Research Institutes For Pricing and additonal details kindly write or call us.

Water Washout Tester As per ASTM D1264 The water washout apparatus is suitable for testing water washout characteristics of grease as per ASTM D1264. A sample of the lubricating grease under evaluation is tested in a bearing rotating under specific speed by spraying heated water and the loss of grease is determined. A tank is provided to hold about 750 ml of water with heating arrangement for heating the water to up to temperature 80°C. The equipment is provided with test bearing housing assembly as specified in the test method. The digital temperature controller with sensor is also provided for accurate indication of the temperature inside the equipment. The unit is provided with a ball bearing (ASTM 204) as specified in the test method. Circulating pump provided with a supply pressure and a return suction line, regulating valves, a splash nozzle and accessory.The pump is capable of delivering 300 ml/min heated water via 1mm capillary. The water containing washed out grease is collected in the tank, filtered & recycled during the test. Provision is made for fine adjustable of water flow through a bypass to allow the preheated water to circulate without passing through the jet or impinge on bearing housing. Features The bearing rotational speed is 600 ± 30 rpm. Supplied with test bearings – 2 Nos. Drain valve to remove the tested water. Provided with necessary tools and fixtures for assembling of bearing housing. Power supply : 120 V / 230 AC, Single Phase, 50 / 60 Hz