Name: Water Spray Off Tester
Availability: instock

Water Spray Off Tester

WATER SPRAY OFF TESTER As per ASTM D 4049 Water spray off tester evaluates the ability of a lubricating grease to adhere to a metal surface when subjected to a direct water spray under controlled conditions. The percentage of grease sprayed off a stainless steel test panel after a specified period is determined by weight. - It Conforms to ASTM D4049 specifications The equipment including spray chamber, delivery system and constant temperature reservoir. It Sprays water at the specified rate and temperature on a test panel coated with sample grease. To test for water spray resistance, fill reservoir with 8L of tap water and set the temperature comtroller at test temperature. Circulate the water through the system to attain temperature equilibrium and insert the coated test panel in the spray chamber. Adjust water spray to 40psi (276kPa) and continue for 5 minutes. Water spray system includes 1.3hp positive displacement pump; spray nozzle with snubber fitting: 0-60psi pressure gauge; bypass valve; shut-off and drain valves; and flexible high pressure water lines. Hinged acrylic spray chamber cover is recessed into the chamber housing to insure watertight operation. Standardized grease application fixture coats test panel with the required thickness of sample grease. Uses tap water; does not require water hook-up. The system includes: Stainless steel test panel Grease application fixture Thermometer holders Pressure gauge Salient feature – Dital Temperature Controller Unit for temperature accuracy 0.03°C Temperature range : 35.00 to 150.0°C Power supply: 230 Volt AC. 1 phase, 50Hz Country of Origin : India

Send Message

Grease Testing Equipment

Grease Kettle Pressure Vessel Type

INR 350000

Send Message

Petroleum Lube Oil Testing Machine

RPVOT - Oxidation Stability by Rotating Pressure Vessel Method for Turbine Oil

RPVOT : Rotating Pressure Vessel Oxidation Stability Test As per ASTM D 2112, D 2272, IP 229, IS:12958-1990: The Equipment is used to evaluate the oxidation stability of new and in-service engine, turbine and insulating oils in the presence of water and a copper catalyst. Features : 2 Nos. of Rotating pressure vessels oil bath on castors. Digital electronic temperature controller with safety mechanical fail-safe thermostat. Heavy duty drive motor to rotate pressure vessel at 100 rpm and is housed below the oil bath. Rotating pressure vessel constructed of stainless steel with stem and valve to receive pressure transducer. Pressure vessel is held at an angle of 30° Capacity of bath is 70 litres with stainless steel body and top cover. Catalyst wire, glass liners with PTFE-cover, an ASTM 96C thermometer, 'O' ring supplied with the unit. Automatic Pressure digital data logger with PC interfacing software supplied on CD-ROM with pressure sensor.

Send Message

Grease Testing Equipment

Water Washout Tester

Water Washout Tester As per ASTM D1264 The water washout apparatus is suitable for testing water washout characteristics of grease as per ASTM D1264. A sample of the lubricating grease under evaluation is tested in a bearing rotating under specific speed by spraying heated water and the loss of grease is determined. A tank is provided to hold about 750 ml of water with heating arrangement for heating the water to up to temperature 80°C. The equipment is provided with test bearing housing assembly as specified in the test method. The digital temperature controller with sensor is also provided for accurate indication of the temperature inside the equipment. The unit is provided with a ball bearing (ASTM 204) as specified in the test method. Circulating pump provided with a supply pressure and a return suction line, regulating valves, a splash nozzle and accessory.The pump is capable of delivering 300 ml/min heated water via 1mm capillary. The water containing washed out grease is collected in the tank, filtered & recycled during the test. Provision is made for fine adjustable of water flow through a bypass to allow the preheated water to circulate without passing through the jet or impinge on bearing housing. Features The bearing rotational speed is 600 ± 30 rpm. Supplied with test bearings – 2 Nos. Drain valve to remove the tested water. Provided with necessary tools and fixtures for assembling of bearing housing. Power supply : 120 V / 230 AC, Single Phase, 50 / 60 Hz

Send Message

Cold Filter Plugging Point Apparatus

Cold Filter Plugging Point Apparatus as per ASTM D6371; IP 309, 419; EN 116 The Cold Filter Plugging Point (CFPP) Apparatus determines low temperature flow characteristics of diesel fuels, gas oils and other distillate fuels. It comprises a 4 liter dry ice bath (Dewar Flask) and a CFPP test insert connected via a three way cock to a UKAS certified digital manometer and two 5 litre pressure equalising vessels

Send Message

Petroleum Lube Oil Testing Machine

Copper Corrosion Bath

Copper Corrosion Bath as per ASTM D130 The copper Strop Corrosion bath determines the relative degree of corrosivity of petroleum products. The copper strip is immersed in 30 ml of oil sample at elevated temperature. After the completion of test , the copper strip is examined for presence of corrosion and a classification number from 1- 4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standard Charts. For aviation fuels and natural gasoline the sample tube is placed inside a stainless steel bomb during testing. Circulation system – Heavy duty capacitor run motor with stirrer to help maintain uniform temperature across bath media. Heater – immersion heater fitted to help achieve above ambient temperature. Heater connected to PID output heater wiring done using Teflon coated cable Temperature controller & instrumentation - fully automatic microprocessor based PID controller having feather touch key board. Display indicating temperature with resolution of 0.01& the controller is having splash proof membrane with PT - 100 sensors. Features 6 place constant temperature bath. 4 No lid with hook to lay low-pressure bombs. Digital temperature controller with PT-100 sensor. Temperature range from ambient to 100°C, ± 1°C. Power supply : 120 V / 230 V, 1 Phase, 50/60 Hz. Country of Origin : INDIA

Send Message

Vertical Autoclave

INR 55000

Send Message

Water Jacketed Oven

Water Jacketed Ovens are Ideal for wide range of incubating, tempering, thermal storage and drying application of inflammable material. Triple walled construction with inner and middle chamber form a jacket and made out of thick gauge stainless steel, Water inlet / outlet and overflow provided. Stainless steel water reservoir with float valve is fitted on the rear side of the oven. Thermal insulation lagged in-between the walls. The door will be of flush type and will be provided with positive locking arrangement. Heavy duty flameproof motor having class “F“ insulation and IP-55 protection with blower provided on top of the oven for air circulation inside the chamber. Flameproof heating elements are wound around the chamber to facilitate uniform dissipation of heat all over the chamber. Flameproof, weatherproof enclosed Digital temperature controller with PT-100 sensor.