Name: Copper Corrosion Bath
Availability: instock

Copper Corrosion Bath

Copper Corrosion Bath as per ASTM D130 The copper Strop Corrosion bath determines the relative degree of corrosivity of petroleum products. The copper strip is immersed in 30 ml of oil sample at elevated temperature. After the completion of test , the copper strip is examined for presence of corrosion and a classification number from 1- 4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standard Charts. For aviation fuels and natural gasoline the sample tube is placed inside a stainless steel bomb during testing. Circulation system – Heavy duty capacitor run motor with stirrer to help maintain uniform temperature across bath media. Heater – immersion heater fitted to help achieve above ambient temperature. Heater connected to PID output heater wiring done using Teflon coated cable Temperature controller & instrumentation - fully automatic microprocessor based PID controller having feather touch key board. Display indicating temperature with resolution of 0.01& the controller is having splash proof membrane with PT - 100 sensors. Features 6 place constant temperature bath. 4 No lid with hook to lay low-pressure bombs. Digital temperature controller with PT-100 sensor. Temperature range from ambient to 100°C, ± 1°C. Power supply : 120 V / 230 V, 1 Phase, 50/60 Hz. Country of Origin : INDIA

Send Message

Grease Testing Equipment

Grease Kettle Pressure Vessel Type

INR 350000

Send Message

Grease Testing Equipment

Grease Making Bath - Open Kettle Type

INR 150000 ~~INR 165000~~

Send Message

Petroleum Lube Oil Testing Machine

Foam Bath

INR 350000 ~~INR 370000~~

Send Message

Petroleum Lube Oil Testing Machine

Channel Point Tester

INR 435000 ~~INR 485000~~

Send Message

Petroleum Lube Oil Testing Machine

Viscosity Bath

INR 65000

Send Message

Grease Testing Equipment

Water Washout Tester

Water Washout Tester As per ASTM D1264 The water washout apparatus is suitable for testing water washout characteristics of grease as per ASTM D1264. A sample of the lubricating grease under evaluation is tested in a bearing rotating under specific speed by spraying heated water and the loss of grease is determined. A tank is provided to hold about 750 ml of water with heating arrangement for heating the water to up to temperature 80°C. The equipment is provided with test bearing housing assembly as specified in the test method. The digital temperature controller with sensor is also provided for accurate indication of the temperature inside the equipment. The unit is provided with a ball bearing (ASTM 204) as specified in the test method. Circulating pump provided with a supply pressure and a return suction line, regulating valves, a splash nozzle and accessory.The pump is capable of delivering 300 ml/min heated water via 1mm capillary. The water containing washed out grease is collected in the tank, filtered & recycled during the test. Provision is made for fine adjustable of water flow through a bypass to allow the preheated water to circulate without passing through the jet or impinge on bearing housing. Features The bearing rotational speed is 600 ± 30 rpm. Supplied with test bearings – 2 Nos. Drain valve to remove the tested water. Provided with necessary tools and fixtures for assembling of bearing housing. Power supply : 120 V / 230 AC, Single Phase, 50 / 60 Hz

Send Message

Tablet Disintegration Test Apparatus

Disintegration Tester is a solid state instrument designed for the accurate estimation of disintegration time of tablets as per IP/USP standards. The instrument is designed to test two batches of six tablets, simultaneously. The unit is extremely useful for pharmaceutical industries. It is used in quality control and R & D to determine compliance with the disintegration requirement of the tablet and capsule as per USP/BP/IP standards. Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts, which guide you throughout the measurement process. Specifications: » Complies with USP, IP specifications » Extremely useful for pharmaceutical labs » Highly Accurate and Easy to Operate » Baskets UP & DOWN movement as per IP/USP Specifications » 20 x 4 Line Alphanumeric LCD with Backlit » 15 Soft Touch Membrane Type Keys

Send Message

Water Jacketed Oven

Water Jacketed Ovens are Ideal for wide range of incubating, tempering, thermal storage and drying application of inflammable material. Triple walled construction with inner and middle chamber form a jacket and made out of thick gauge stainless steel, Water inlet / outlet and overflow provided. Stainless steel water reservoir with float valve is fitted on the rear side of the oven. Thermal insulation lagged in-between the walls. The door will be of flush type and will be provided with positive locking arrangement. Heavy duty flameproof motor having class “F“ insulation and IP-55 protection with blower provided on top of the oven for air circulation inside the chamber. Flameproof heating elements are wound around the chamber to facilitate uniform dissipation of heat all over the chamber. Flameproof, weatherproof enclosed Digital temperature controller with PT-100 sensor.