'vessel arrangement'

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

RPVOT : Rotating Pressure Vessel Oxidation Stability Test As per ASTM D 2112, D 2272, IP 229, IS:12958-1990: The Equipment is used to evaluate the oxidation stability of new and in-service engine, turbine and insulating oils in the presence of water and a copper catalyst. Features : 2 Nos. of Rotating pressure vessels oil bath on castors. Digital electronic temperature controller with safety mechanical fail-safe thermostat. Heavy duty drive motor to rotate pressure vessel at 100 rpm and is housed below the oil bath. Rotating pressure vessel constructed of stainless steel with stem and valve to receive pressure transducer. Pressure vessel is held at an angle of 30° Capacity of bath is 70 litres with stainless steel body and top cover. Catalyst wire, glass liners with PTFE-cover, an ASTM 96C thermometer, 'O' ring supplied with the unit. Automatic Pressure digital data logger with PC interfacing software supplied on CD-ROM with pressure sensor.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Water Washout Tester As per ASTM D1264 The water washout apparatus is suitable for testing water washout characteristics of grease as per ASTM D1264. A sample of the lubricating grease under evaluation is tested in a bearing rotating under specific speed by spraying heated water and the loss of grease is determined. A tank is provided to hold about 750 ml of water with heating arrangement for heating the water to up to temperature 80°C. The equipment is provided with test bearing housing assembly as specified in the test method. The digital temperature controller with sensor is also provided for accurate indication of the temperature inside the equipment. The unit is provided with a ball bearing (ASTM 204) as specified in the test method. Circulating pump provided with a supply pressure and a return suction line, regulating valves, a splash nozzle and accessory.The pump is capable of delivering 300 ml/min heated water via 1mm capillary. The water containing washed out grease is collected in the tank, filtered & recycled during the test. Provision is made for fine adjustable of water flow through a bypass to allow the preheated water to circulate without passing through the jet or impinge on bearing housing. Features The bearing rotational speed is 600 ± 30 rpm. Supplied with test bearings – 2 Nos. Drain valve to remove the tested water. Provided with necessary tools and fixtures for assembling of bearing housing. Power supply : 120 V / 230 AC, Single Phase, 50 / 60 Hz

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Salt Spray Corrosion Cabinet : A thermostatic dome-shaped Salt Spray Cabinet, designed for evaluating the corrosion resistance of surface coatings in a controlled, accelerated environment. This apparatus simulates salt-laden atmospheres to assess the durability of coatings like paints, plating, and galvanizing. Key Features: Thermostatic Design: Dome-shaped corrosion-resistant chamber made from 6 mm thick imported Perspex sheet for maximum durability and transparency. Temperature Control: Microprocessor-based PID Digital Temperature Indicator cum Controller Built-in Digital Timer with Memory Backup Heating System: High-efficiency Heater with Sensor Supplied with One Spare Heater Spray Mechanism: Atomizing Nozzles for fine mist generation Tray and Hanging Arrangement provided as per standard specifications (Air Compressor to be arranged separately) Safety and Compliance: Low Water Level Safety: Water Level Sensor with Alarm Indicator and Buzzer Thermal Protection: Built-in Thermostat for over-temperature protection Additional Accessories: Fog Collection Device for salt fog measurement

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Salt Spray Corrosion Cabinet : Thermostatic dome shaped model. Thermostatically controlled within built microprocessor digital temperature indicator cum controller with timer. Made from Imported 6 mm thick Perspex sheet. Supplied with suitable tray, Nozzle & Hanging arrangement (without compressor) Apparatus consists of : ● Salt Spray Chamber ● PID Digital Temperature indicator cum controller ● Digital Timer with memory backup ● Heater and Sensor with one spare heater. ● Atomizing Nozzles ● Hanging arrangement with tray as per Standard ● Safety Feature water level sensor for low reservoir alarm with indicator cum buzzer ● Thermostat for Temperature regulator ● Fog Collection Device

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Abel Flash Point Apparatus. Electrically operated having Thermostatic control As per IP 33, 170 & IS 1448 (PT I) For Determination of flash point of petroleum products and mixture having flash point below 49°C ( 120°F ) The apparatus consists of Brass Cup fitted with test flame arrangement. Stirrer is placed for maual stirring during testing. The Outer Jacket of the water bath is fitted with a stand. Heating is by 500 watts coil heater fitted to the stand. Heating is controlled by Energy Regulator. Country of Origin : INDIA

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Cold Filter Plugging Point Apparatus as per ASTM D6371; IP 309, 419; EN 116 The Cold Filter Plugging Point (CFPP) Apparatus determines low temperature flow characteristics of diesel fuels, gas oils and other distillate fuels. It comprises a 4 liter dry ice bath (Dewar Flask) and a CFPP test insert connected via a three way cock to a UKAS certified digital manometer and two 5 litre pressure equalising vessels

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: