Salt Spray Chamber

Salt Spray Corrosion Cabinet : Thermostatic dome shaped model. Thermostatically controlled within built microprocessor digital temperature indicator cum controller with timer. Made from Imported 6 mm thick Perspex sheet. Supplied with suitable tray, Nozzle & Hanging arrangement (without compressor) Apparatus consists of : ● Salt Spray Chamber ● PID Digital Temperature indicator cum controller ● Digital Timer with memory backup ● Heater and Sensor with one spare heater. ● Atomizing Nozzles ● Hanging arrangement with tray as per Standard ● Safety Feature water level sensor for low reservoir alarm with indicator cum buzzer ● Thermostat for Temperature regulator ● Fog Collection Device

Send Message

Gel Time Apparatus

As per ASTM D4217 , DIN 55990- P8 Gel Time Apparatus is used for determination gel time of powder coating or sample at which time it turns into gel on a polished metal surface at specific temperature. Gel time is the time at which the sample turns into gel from solid and it is not able to be used further. Gel time apparatus is made from non corrosive material. The top plate is made up of aluminium and it is provided with a sensor. It has a long lasting heating coil, temperature controller and digital timer display. It is widely used in plastic industries, powder coating.

Send Message

Abel Flash Point Tester

Abel Flash Point Apparatus. Electrically operated having Thermostatic control As per IP 33, 170 & IS 1448 (PT I) For Determination of flash point of petroleum products and mixture having flash point below 49°C ( 120°F ) The apparatus consists of Brass Cup fitted with test flame arrangement. Stirrer is placed for maual stirring during testing. The Outer Jacket of the water bath is fitted with a stand. Heating is by 500 watts coil heater fitted to the stand. Heating is controlled by Energy Regulator. Country of Origin : INDIA

Send Message

ASTM D86 Solvent Distillation Apparatus

ASTM Solvent Distillation Apparatus is used to separate the mixture of liquid solvent and petroleum products. The appratus determines initial boiling point, final boiling point, dry point , % of residue remains and % of material recovered. It consists of a water bath having outer chamber made of epoxy powdear coated. Inner chamber made of stainless steel with condenser tube, heating unit with regulator for controlling the temperature, measuring cylinder, flask with IP standard and thermometer -10°C to 360°C. It is widely used in paint and coating industries, oil and solvent, other liquid mixture. Standard: IS 1448 (P-18), IP 123, ASTM D 86 Package Includes: ASTM distillation apparatus, flask,measuring cylinder 100 ml,manual and thermometer (-10°C to 360°C)

Send Message

Water Spray Off Tester

WATER SPRAY OFF TESTER As per ASTM D 4049 Water spray off tester evaluates the ability of a lubricating grease to adhere to a metal surface when subjected to a direct water spray under controlled conditions. The percentage of grease sprayed off a stainless steel test panel after a specified period is determined by weight. - It Conforms to ASTM D4049 specifications The equipment including spray chamber, delivery system and constant temperature reservoir. It Sprays water at the specified rate and temperature on a test panel coated with sample grease. To test for water spray resistance, fill reservoir with 8L of tap water and set the temperature comtroller at test temperature. Circulate the water through the system to attain temperature equilibrium and insert the coated test panel in the spray chamber. Adjust water spray to 40psi (276kPa) and continue for 5 minutes. Water spray system includes 1.3hp positive displacement pump; spray nozzle with snubber fitting: 0-60psi pressure gauge; bypass valve; shut-off and drain valves; and flexible high pressure water lines. Hinged acrylic spray chamber cover is recessed into the chamber housing to insure watertight operation. Standardized grease application fixture coats test panel with the required thickness of sample grease. Uses tap water; does not require water hook-up. The system includes: Stainless steel test panel Grease application fixture Thermometer holders Pressure gauge Salient feature – Dital Temperature Controller Unit for temperature accuracy 0.03°C Temperature range : 35.00 to 150.0°C Power supply: 230 Volt AC. 1 phase, 50Hz Country of Origin : India

Send Message

Lithium ion battery vacuum drying oven with three chamber

INR 525000

Send Message

Tablet Disintegration Test Apparatus

Disintegration Tester is a solid state instrument designed for the accurate estimation of disintegration time of tablets as per IP/USP standards. The instrument is designed to test two batches of six tablets, simultaneously. The unit is extremely useful for pharmaceutical industries. It is used in quality control and R & D to determine compliance with the disintegration requirement of the tablet and capsule as per USP/BP/IP standards. Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts, which guide you throughout the measurement process. Specifications: » Complies with USP, IP specifications » Extremely useful for pharmaceutical labs » Highly Accurate and Easy to Operate » Baskets UP & DOWN movement as per IP/USP Specifications » 20 x 4 Line Alphanumeric LCD with Backlit » 15 Soft Touch Membrane Type Keys

Send Message

Digital Bulk Density Apparatus

The Digital Bulk Density Apparatus is a microprocessor based instrument designed to study the packing down of powder beds of different pharmaceutical & chemical powders and gives accurate & repeatability of the result. Bulk Density is an essential test required in the process of Tablet manufacturing, capsules filling and cosmetics manufacturing as important part of quality control program. 4 digit microprocessor based Pre-set counter provided to set exact no of strokes. This feature eliminates the tedious calculation of Timer Mode. A common holder for both the cylinder drops down smoothly from the specified height. Easy to lock cushioned holders are provided to hold the cylinder. In power failure, the non-volatile memory of the microprocessor remember the last mode of operation, and complete the test after the power supply is resumed. It has the following features: Specifications : » Display: Digital 12 mm Red LED » Speed range - 30RPM Mechanical Timer/Digital counter as per requirement.

Send Message

Cold Filter Plugging Point Apparatus

Cold Filter Plugging Point Apparatus as per ASTM D6371; IP 309, 419; EN 116 The Cold Filter Plugging Point (CFPP) Apparatus determines low temperature flow characteristics of diesel fuels, gas oils and other distillate fuels. It comprises a 4 liter dry ice bath (Dewar Flask) and a CFPP test insert connected via a three way cock to a UKAS certified digital manometer and two 5 litre pressure equalising vessels

Send Message

High Temperature Wheel Bearing Grease Tester

As per ASTM D3527 ,D4290, D4950. The equipment is used for testing of grease for evaluating its life performance by testing at high-temperature. The equipment consists of a modified front wheel hub-spindle-bearings assembly housed in a constant temperature oven and coupled to a ¼ Hp variable-speed drive motor. It Control the test functions automatically and provides continuous digital display of motor torque, rpm, chamber temperature, spindle temperature, time cycle and elapsed time. Test parameters outside of ASTM specifications can be selected by the operator for in-house testing. Automatically terminates test and displays elapsed on-cycle hours when grease deterioration causes drive motor torque to increase to the calibrated end point. A built-in thirty second time delay circuit prevents erroneous test terminations due to momentary surges in motor torque at the beginning of the on-cycle. Insulated constant temperature oven is equipped with a 1200W heater and balanced 1/20 hp circulation fan for efficient heat distribution. Sliding access doors and a movable platform that swings the drive motor out of the way provide easy access to the spindle assembly. Modified steel spindle and hub assembly conforms to all critical 1971 Chevy II dimensions and is fitted with thermocouple, bearing thrust loading device and anodized aluminum grease collector. All controls and monitors are housed in a separate cabinet. Digital controls and displays: Timer : on/off cycle and real time Motor rpm : 0-1725 rpm Motor Torque: current draw Elapsed Time: 9999.9 hr. Maximum Temperature: 177°C Electrical Requirements 220-240V 50Hz, Single Phase, 7A Included Accessories Thermocouples (2) Thermometer holder Bearings (1 set) Grease Packer Assembly Bearing Installation/Removal Tools: Bearing installer, small and large bearing cup removers, bearing cup installer, bearing puller and spindle wrenches (pins)

Send Message

Petroleum Lube Oil Testing Machine

Copper Corrosion Bath

Copper Corrosion Bath as per ASTM D130 The copper Strop Corrosion bath determines the relative degree of corrosivity of petroleum products. The copper strip is immersed in 30 ml of oil sample at elevated temperature. After the completion of test , the copper strip is examined for presence of corrosion and a classification number from 1- 4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standard Charts. For aviation fuels and natural gasoline the sample tube is placed inside a stainless steel bomb during testing. Circulation system – Heavy duty capacitor run motor with stirrer to help maintain uniform temperature across bath media. Heater – immersion heater fitted to help achieve above ambient temperature. Heater connected to PID output heater wiring done using Teflon coated cable Temperature controller & instrumentation - fully automatic microprocessor based PID controller having feather touch key board. Display indicating temperature with resolution of 0.01& the controller is having splash proof membrane with PT - 100 sensors. Features 6 place constant temperature bath. 4 No lid with hook to lay low-pressure bombs. Digital temperature controller with PT-100 sensor. Temperature range from ambient to 100°C, ± 1°C. Power supply : 120 V / 230 V, 1 Phase, 50/60 Hz. Country of Origin : INDIA