'acrylic body safety shield'

Acrylic Body Rotameters are machined from clear acrylic block. They are designed to give maximum accuracy in visibility and ruggedness. The floats are made from Stainless Steel, PVC and other non corrosive plastics and offered as per the process requirement. The needle valve is provided for accurate flow control. It is designed to give accuracy of within 1.5 to 2 % at full scale. The higher accuracy can be made on specific requirement. The Rotameter can be fitted with Top / Bottom or rear connections as per specific requirement. The Rotameters are ideal for direct panel mounting because of their clear modular appearance, online installation is also possible.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

RPVOT : Rotating Pressure Vessel Oxidation Stability Test As per ASTM D 2112, D 2272, IP 229, IS:12958-1990: The Equipment is used to evaluate the oxidation stability of new and in-service engine, turbine and insulating oils in the presence of water and a copper catalyst. Features : 2 Nos. of Rotating pressure vessels oil bath on castors. Digital electronic temperature controller with safety mechanical fail-safe thermostat. Heavy duty drive motor to rotate pressure vessel at 100 rpm and is housed below the oil bath. Rotating pressure vessel constructed of stainless steel with stem and valve to receive pressure transducer. Pressure vessel is held at an angle of 30° Capacity of bath is 70 litres with stainless steel body and top cover. Catalyst wire, glass liners with PTFE-cover, an ASTM 96C thermometer, 'O' ring supplied with the unit. Automatic Pressure digital data logger with PC interfacing software supplied on CD-ROM with pressure sensor.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

The Taber Abrasion Tester is used to determine the abrasion resistance of organic coatings produced on a plane, rigid surface. The sample panel can be 100 mm diameter disc or 100 × 100 mm square panel with rounded corners and a 6.3 mm center hole. The weighted specimen is mounted on a turntable disc, while the abrasive wheel applies load on the test film. The abrasion resistance varies according to the applied load. This tester is widely used in quality & process control, R&D, and material evaluation across industries such as coatings, textiles, leather, rubber, plastics, wood, glass, paper, laminates, and ceramics. Standards: ASTM D4060, ISO 9352 Key Features: Easy-to-use control panel with Total Count & Batch Count display Vacuum pump system with suction hose for direct flow between hose & rotating disc Release Wheel Hub for quick mounting without tools Balanced calibration arms & wheel mounts with high precision weights Technical Specifications: Platform Speed: 60 ± 2 rpm Auxiliary Weights: 250 gm, 500 gm & 1000 gm (two sets, one per arm) Counterweights: 125 gm & 175 gm (two sets, one per arm) Abrasive Wheels: CS10, CS17 (USA Taber Make – any one) Material: Mild Steel body with durable powder coating; holding arms, counter & auxiliary weights, base disc made of stainless steel. Package Includes: Taber Abrasion Tester Auxiliary weights & counterweights Taber abrasive wheel (CS10) Vacuum pump with suction hose Operation manual Calibration certificate Spares

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

The EMCOR Rust Tester is designed to determine the corrosion-preventive properties of lubricating greases on ball bearings in the presence of water or salt water. The system replicates real-world mechanical and environmental conditions by rotating and resting the bearings in a water medium. It is built to conform with IP 220 , DIN 51802 and ASTM D6138, enabling both dynamic and static corrosion testing of greases. Key Features: 4 / 6 / 8 test setup for testing of bearings simultaneously Bearing housing in SS 316 for high corrosion resistance Powder-coated outer body for long life Operates at 80 RPM with automatic rest/run cycles Includes plummer blocks, adapter sleeves, self-aligning bearings, and V-ring seals Microcontroller-based Run/Rest Timer. Scope of Supply: EMCOR Test Rig with Base Plate Electric Motor with Gear System SS Shaft and Support Assembly Plummer Blocks & Bearing Housings Self-Aligning Bearings Adapter Sleeves & V-Ring Seals Electronic Run/Stop Timer User Manual Applications: Corrosion Testing of Grease in Bearings R&D Labs in Lubricant Industry Grease Quality Control Labs Bearing Testing Facilities Tribology Research Institutes For Pricing and additonal details kindly write or call us.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: