Name: Water Jacketed Oven
Availability: instock

Water Jacketed Ovens are Ideal for wide range of incubating, tempering, thermal storage and drying application of inflammable material. Triple walled construction with inner and middle chamber form a jacket and made out of thick gauge stainless steel, Water inlet / outlet and overflow provided. Stainless steel water reservoir with float valve is fitted on the rear side of the oven. Thermal insulation lagged in-between the walls. The door will be of flush type and will be provided with positive locking arrangement. Heavy duty flameproof motor having class “F“ insulation and IP-55 protection with blower provided on top of the oven for air circulation inside the chamber. Flameproof heating elements are wound around the chamber to facilitate uniform dissipation of heat all over the chamber. Flameproof, weatherproof enclosed Digital temperature controller with PT-100 sensor.

Send Message

Lithium ion battery vacuum drying oven with three chamber

INR 525000

Send Message

GMP Laboratory Oven

Laboratory Oven

Hot Air Oven : GMP Model GMP Models of Laboratory Ovens are used in Research and Development Lab of Pharmaceutical and Food Processing Industries. The Oven is constructed with Excellent quality Stainless Steel with combination of SS 304 / SS 316 , or Entirely made with SS 304 and SS 316 depending upon customer requirements. High Quality , long life Tubular Air Heaters are used for achieving desired temperature within stipulated time. PID Digital Temperature Controller is provided for accurate temperature control within the Oven.

Send Message

Abel Flash Point Tester

Abel Flash Point Apparatus. Electrically operated having Thermostatic control As per IP 33, 170 & IS 1448 (PT I) For Determination of flash point of petroleum products and mixture having flash point below 49°C ( 120°F ) The apparatus consists of Brass Cup fitted with test flame arrangement. Stirrer is placed for maual stirring during testing. The Outer Jacket of the water bath is fitted with a stand. Heating is by 500 watts coil heater fitted to the stand. Heating is controlled by Energy Regulator. Country of Origin : INDIA

Send Message

High Temperature Wheel Bearing Grease Tester

As per ASTM D3527 ,D4290, D4950. The equipment is used for testing of grease for evaluating its life performance by testing at high-temperature. The equipment consists of a modified front wheel hub-spindle-bearings assembly housed in a constant temperature oven and coupled to a ¼ Hp variable-speed drive motor. It Control the test functions automatically and provides continuous digital display of motor torque, rpm, chamber temperature, spindle temperature, time cycle and elapsed time. Test parameters outside of ASTM specifications can be selected by the operator for in-house testing. Automatically terminates test and displays elapsed on-cycle hours when grease deterioration causes drive motor torque to increase to the calibrated end point. A built-in thirty second time delay circuit prevents erroneous test terminations due to momentary surges in motor torque at the beginning of the on-cycle. Insulated constant temperature oven is equipped with a 1200W heater and balanced 1/20 hp circulation fan for efficient heat distribution. Sliding access doors and a movable platform that swings the drive motor out of the way provide easy access to the spindle assembly. Modified steel spindle and hub assembly conforms to all critical 1971 Chevy II dimensions and is fitted with thermocouple, bearing thrust loading device and anodized aluminum grease collector. All controls and monitors are housed in a separate cabinet. Digital controls and displays: Timer : on/off cycle and real time Motor rpm : 0-1725 rpm Motor Torque: current draw Elapsed Time: 9999.9 hr. Maximum Temperature: 177°C Electrical Requirements 220-240V 50Hz, Single Phase, 7A Included Accessories Thermocouples (2) Thermometer holder Bearings (1 set) Grease Packer Assembly Bearing Installation/Removal Tools: Bearing installer, small and large bearing cup removers, bearing cup installer, bearing puller and spindle wrenches (pins)

Send Message

Petroleum Lube Oil Testing Machine

Copper Corrosion Bath

Copper Corrosion Bath as per ASTM D130 The copper Strop Corrosion bath determines the relative degree of corrosivity of petroleum products. The copper strip is immersed in 30 ml of oil sample at elevated temperature. After the completion of test , the copper strip is examined for presence of corrosion and a classification number from 1- 4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standard Charts. For aviation fuels and natural gasoline the sample tube is placed inside a stainless steel bomb during testing. Circulation system – Heavy duty capacitor run motor with stirrer to help maintain uniform temperature across bath media. Heater – immersion heater fitted to help achieve above ambient temperature. Heater connected to PID output heater wiring done using Teflon coated cable Temperature controller & instrumentation - fully automatic microprocessor based PID controller having feather touch key board. Display indicating temperature with resolution of 0.01& the controller is having splash proof membrane with PT - 100 sensors. Features 6 place constant temperature bath. 4 No lid with hook to lay low-pressure bombs. Digital temperature controller with PT-100 sensor. Temperature range from ambient to 100°C, ± 1°C. Power supply : 120 V / 230 V, 1 Phase, 50/60 Hz. Country of Origin : INDIA