Name: Salt Spray Chamber
Availability: instock

Salt Spray Corrosion Cabinet : A thermostatic dome-shaped Salt Spray Cabinet, designed for evaluating the corrosion resistance of surface coatings in a controlled, accelerated environment. This apparatus simulates salt-laden atmospheres to assess the durability of coatings like paints, plating, and galvanizing. Key Features: Thermostatic Design: Dome-shaped corrosion-resistant chamber made from 6 mm thick imported Perspex sheet for maximum durability and transparency. Temperature Control: Microprocessor-based PID Digital Temperature Indicator cum Controller Built-in Digital Timer with Memory Backup Heating System: High-efficiency Heater with Sensor Supplied with One Spare Heater Spray Mechanism: Atomizing Nozzles for fine mist generation Tray and Hanging Arrangement provided as per standard specifications (Air Compressor to be arranged separately) Safety and Compliance: Low Water Level Safety: Water Level Sensor with Alarm Indicator and Buzzer Thermal Protection: Built-in Thermostat for over-temperature protection Additional Accessories: Fog Collection Device for salt fog measurement

Send Message

Salt Spray Chamber

Salt Spray Corrosion Cabinet : Thermostatic dome shaped model. Thermostatically controlled within built microprocessor digital temperature indicator cum controller with timer. Made from Imported 6 mm thick Perspex sheet. Supplied with suitable tray, Nozzle & Hanging arrangement (without compressor) Apparatus consists of : ● Salt Spray Chamber ● PID Digital Temperature indicator cum controller ● Digital Timer with memory backup ● Heater and Sensor with one spare heater. ● Atomizing Nozzles ● Hanging arrangement with tray as per Standard ● Safety Feature water level sensor for low reservoir alarm with indicator cum buzzer ● Thermostat for Temperature regulator ● Fog Collection Device

Send Message

Petroleum Lube Oil Testing Machine

RPVOT - Oxidation Stability by Rotating Pressure Vessel Method for Turbine Oil

RPVOT : Rotating Pressure Vessel Oxidation Stability Test As per ASTM D 2112, D 2272, IP 229, IS:12958-1990: The Equipment is used to evaluate the oxidation stability of new and in-service engine, turbine and insulating oils in the presence of water and a copper catalyst. Features : 2 Nos. of Rotating pressure vessels oil bath on castors. Digital electronic temperature controller with safety mechanical fail-safe thermostat. Heavy duty drive motor to rotate pressure vessel at 100 rpm and is housed below the oil bath. Rotating pressure vessel constructed of stainless steel with stem and valve to receive pressure transducer. Pressure vessel is held at an angle of 30° Capacity of bath is 70 litres with stainless steel body and top cover. Catalyst wire, glass liners with PTFE-cover, an ASTM 96C thermometer, 'O' ring supplied with the unit. Automatic Pressure digital data logger with PC interfacing software supplied on CD-ROM with pressure sensor.

Send Message

Grease Testing Equipments

INR 100000

Send Message

ASTM D86 Solvent Distillation Apparatus

ASTM Solvent Distillation Apparatus is used to separate the mixture of liquid solvent and petroleum products. The appratus determines initial boiling point, final boiling point, dry point , % of residue remains and % of material recovered. It consists of a water bath having outer chamber made of epoxy powdear coated. Inner chamber made of stainless steel with condenser tube, heating unit with regulator for controlling the temperature, measuring cylinder, flask with IP standard and thermometer -10°C to 360°C. It is widely used in paint and coating industries, oil and solvent, other liquid mixture. Standard: IS 1448 (P-18), IP 123, ASTM D 86 Package Includes: ASTM distillation apparatus, flask,measuring cylinder 100 ml,manual and thermometer (-10°C to 360°C)

Send Message

Water Spray Off Tester

WATER SPRAY OFF TESTER As per ASTM D 4049 Water spray off tester evaluates the ability of a lubricating grease to adhere to a metal surface when subjected to a direct water spray under controlled conditions. The percentage of grease sprayed off a stainless steel test panel after a specified period is determined by weight. - It Conforms to ASTM D4049 specifications The equipment including spray chamber, delivery system and constant temperature reservoir. It Sprays water at the specified rate and temperature on a test panel coated with sample grease. To test for water spray resistance, fill reservoir with 8L of tap water and set the temperature comtroller at test temperature. Circulate the water through the system to attain temperature equilibrium and insert the coated test panel in the spray chamber. Adjust water spray to 40psi (276kPa) and continue for 5 minutes. Water spray system includes 1.3hp positive displacement pump; spray nozzle with snubber fitting: 0-60psi pressure gauge; bypass valve; shut-off and drain valves; and flexible high pressure water lines. Hinged acrylic spray chamber cover is recessed into the chamber housing to insure watertight operation. Standardized grease application fixture coats test panel with the required thickness of sample grease. Uses tap water; does not require water hook-up. The system includes: Stainless steel test panel Grease application fixture Thermometer holders Pressure gauge Salient feature – Dital Temperature Controller Unit for temperature accuracy 0.03°C Temperature range : 35.00 to 150.0°C Power supply: 230 Volt AC. 1 phase, 50Hz Country of Origin : India

Send Message

Lithium ion battery vacuum drying oven with three chamber

INR 525000

Send Message

High Temperature Wheel Bearing Grease Tester

As per ASTM D3527 ,D4290, D4950. The equipment is used for testing of grease for evaluating its life performance by testing at high-temperature. The equipment consists of a modified front wheel hub-spindle-bearings assembly housed in a constant temperature oven and coupled to a ¼ Hp variable-speed drive motor. It Control the test functions automatically and provides continuous digital display of motor torque, rpm, chamber temperature, spindle temperature, time cycle and elapsed time. Test parameters outside of ASTM specifications can be selected by the operator for in-house testing. Automatically terminates test and displays elapsed on-cycle hours when grease deterioration causes drive motor torque to increase to the calibrated end point. A built-in thirty second time delay circuit prevents erroneous test terminations due to momentary surges in motor torque at the beginning of the on-cycle. Insulated constant temperature oven is equipped with a 1200W heater and balanced 1/20 hp circulation fan for efficient heat distribution. Sliding access doors and a movable platform that swings the drive motor out of the way provide easy access to the spindle assembly. Modified steel spindle and hub assembly conforms to all critical 1971 Chevy II dimensions and is fitted with thermocouple, bearing thrust loading device and anodized aluminum grease collector. All controls and monitors are housed in a separate cabinet. Digital controls and displays: Timer : on/off cycle and real time Motor rpm : 0-1725 rpm Motor Torque: current draw Elapsed Time: 9999.9 hr. Maximum Temperature: 177°C Electrical Requirements 220-240V 50Hz, Single Phase, 7A Included Accessories Thermocouples (2) Thermometer holder Bearings (1 set) Grease Packer Assembly Bearing Installation/Removal Tools: Bearing installer, small and large bearing cup removers, bearing cup installer, bearing puller and spindle wrenches (pins)